| MRC | Criteria | Characteristic |
|---|
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.030 INCHES NOMINAL 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AGFF | FLANGE WIDTH | 2.220 INCHES NOMINAL 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.315 INCHES NOMINAL 1ST END |
| ABKV | OUTSIDE DIAMETER | 1.500 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | 2350-01-390-4683 |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CQGH | (NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CRZY | (NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.062 INCHES NOMINAL 1ST END 2.312 INCHES NOMINAL 2ND END |
| CRLL | (NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC |
| AFQN | FLANGE LENGTH | 2.720 INCHES MINIMUM AND 2.780 INCHES MAXIMUM 1ST END 3.090 INCHES MINIMUM AND 3.160 INCHES MAXIMUM 2ND END |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| CQBB | (NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQBG | (NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END SOLID 2ND END |
| ADLG | (NON-CORE DATA) FIRST END FITTING SPEC/STD DATA | SAE J518,TABLE 1A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ADJM | (NON-CORE DATA) INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| ADLH | (NON-CORE DATA) SECOND END FITTING SPEC/STD DATA | SAE J518,TABLE 1A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| SR-1 | MANUFACTURERS CODE | 19207 |
| CRBL | (NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CQHW | (NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED WIRE 2ND LAYER BRAIDED WIRE OUTER LAYER WRAPPED RUBBER, SYNTHETIC |
| SR-1 | MFR SOURCE CONTROLLING REFERENCE | 12365278-3 |
| AHNC | CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| AARX | INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES |
| CRXX | MEASURING METHOD AND LENGTH | 33.000 INCHES NOMINAL OVERALL |
| CRDW | HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| ADLF | (NON-CORE DATA) HOSE OR TUBING SPEC/STD DATA | SAE J517,100R2,TYPE AT-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END |
