Request a Quote on Bourns Instruments Inc Part Number 220L1-102 with the NSN 5905-00-474-3656 Today!

Part Number: 220L1-102

Alternate P/N: 220L1102

Manufacturer: Bourns Instruments Inc

NSN: 5905-00-474-3656

NIIN: 004743656

Item Name : Resistor Variable Wire Wound Non

CAGE Code: 80294

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

Thank you for taking an interest in the Resistor Variable Wire Wound Non NSN parts that we carry here on Buy Military Ground Vehicle Parts. You have reached the RFQ page for part number 220L1-102, an item that traces back to the manufacturer Bourns Instruments Inc. Listed with NSN 5905004743656, this listing is available for purchase from our website at any time. If you are interested in part number 220L1-102 and wish to learn more, be sure to fill out and submit the RFQ form found on this page. By presenting us information such as your target price and expected delivery date, we can best formulate and present a solution that closely caters to your unique needs and restrictions alike.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Customer Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Note : We Will Not Share Your Information To Any Third Parties.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To make the part searching process as simple as possible, we choose to list offerings with as much relevant information as we can. For example, while part number 220L1-102 is manufactured by Bourns Instruments Inc, it is specifically listed along with CAGE Code 80294. With this identifier, you can trace this item back to the exact facility it was sourced from. Additionally, with the NSN 5905-00-474-3656, this signifies that the product belongs to the Federal Supply Class 5905 Resistors. Alongside our easy-to-navigate database, we also offer highly competitive pricing and rapid lead times for the benefit of our customers. Get in touch with an industry expert today and see why so many customers steadily depend on us for their operational needs.

Characteristics Data of NSN 5905-00-474-3656, 5905004743656

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	III OVERALL LENGTH	1.035 INCHES MINIMUM AND 1.065 INCHES UM"
ABJT	TERMINAL LENGTH	6.000 INCHES NOMINAL"
ABKW	III OVERALL HEIGHT	0.305 INCHES MINIMUM AND 0.325 INCHES UM"
ABMK	III OVERALL WIDTH	0.165 INCHES MINIMUM AND 0.175 INCHES UM"
ABTB	MOUNTING HOLE DIAMETER	0.086 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.120 INCHES MINIMUM AND 0.130 INCHES UM"
ABXF	SHAFT LENGTH	0.040 INCHES MINIMUM AND 0.060 INCHES UM"
ADAQ	BODY LENGTH	0.995 INCHES MINIMUM AND 1.005 INCHES UM"
ADAT	BODY WIDTH	0.165 INCHES MINIMUM AND 0.175 INCHES UM"
ADAU	BODY HEIGHT	0.305 INCHES MINIMUM AND 0.325 INCHES UM"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEDZ	SHAFT BEARING TYPE	BEARING"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AGTP	LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.745 INCHES MINIMUM AND 0.755 INCHES UM"
AKPV	MOUNTING FACILITY QUANTITY	2"
APXH	TERMINAL LOCATION	REAR END"
AXGY	MOUNTING METHOD	UNTHREADED HOLE"
CQCC	ELECTRICAL RESISTANCE PER SECTION	1.000 KILOHMS SINGLE SECTION"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	175.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION"
CRTL	CRITICALITY CODE JUSTIFICATION	ZZZY"
CSCY	TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION"
TTQY	TERMINAL TYPE AND QUANTITY	3 WIRE LEAD"
ZZZY	REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	QUALITY CONTROLLED FOR POLARIS"
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	III OVERALL LENGTH	1.035 INCHES MINIMUM AND 1.065 INCHES UM"
ABJT	TERMINAL LENGTH	6.000 INCHES NOMINAL"
ABKW	III OVERALL HEIGHT	0.305 INCHES MINIMUM AND 0.325 INCHES UM"
ABMK	III OVERALL WIDTH	0.165 INCHES MINIMUM AND 0.175 INCHES UM"
ABTB	MOUNTING HOLE DIAMETER	0.086 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.120 INCHES MINIMUM AND 0.130 INCHES UM"
ABXF	SHAFT LENGTH	0.040 INCHES MINIMUM AND 0.060 INCHES UM"
ADAQ	BODY LENGTH	0.995 INCHES MINIMUM AND 1.005 INCHES UM"
ADAT	BODY WIDTH	0.165 INCHES MINIMUM AND 0.175 INCHES UM"
ADAU	BODY HEIGHT	0.305 INCHES MINIMUM AND 0.325 INCHES UM"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEDZ	SHAFT BEARING TYPE	BEARING"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AGTP	LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.745 INCHES MINIMUM AND 0.755 INCHES UM"
AKPV	MOUNTING FACILITY QUANTITY	2"
APXH	TERMINAL LOCATION	REAR END"
AXGY	MOUNTING METHOD	UNTHREADED HOLE"
CQCC	ELECTRICAL RESISTANCE PER SECTION	1.000 KILOHMS SINGLE SECTION"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	175.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION"
CRTL	CRITICALITY CODE JUSTIFICATION	ZZZY"
CSCY	TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION"
TTQY	TERMINAL TYPE AND QUANTITY	3 WIRE LEAD"
ZZZY	REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	QUALITY CONTROLLED FOR POLARIS"