Request a Quote on Clarostat Sensors And Controls Part Number D6002921-1 with the NSN 5905-01-342-0717 Today!

Part Number: D6002921-1

Alternate P/N: D60029211

Manufacturer: Clarostat Sensors And Controls

NSN: 5905-01-342-0717

NIIN: 013420717

Item Name : Resistor Variable Nonwire Wound

CAGE Code: 12697

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 01

Thank you for taking an interest in the Resistor Variable Nonwire Wound NSN parts that we carry here on Buy Military Ground Vehicle Parts. You have reached the RFQ page for part number D6002921-1, an item that traces back to the manufacturer Clarostat Sensors And Controls. Listed with NSN 5905013420717, this listing is available for purchase from our website at any time. If you are interested in part number D6002921-1 and wish to learn more, be sure to fill out and submit the RFQ form found on this page. By presenting us information such as your target price and expected delivery date, we can best formulate and present a solution that closely caters to your unique needs and restrictions alike.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Customer Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Note : We Will Not Share Your Information To Any Third Parties.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To make the part searching process as simple as possible, we choose to list offerings with as much relevant information as we can. For example, while part number D6002921-1 is manufactured by Clarostat Sensors And Controls, it is specifically listed along with CAGE Code 12697. With this identifier, you can trace this item back to the exact facility it was sourced from. Additionally, with the NSN 5905-01-342-0717, this signifies that the product belongs to the Federal Supply Class 5905 Resistors. Alongside our easy-to-navigate database, we also offer highly competitive pricing and rapid lead times for the benefit of our customers. Get in touch with an industry expert today and see why so many customers steadily depend on us for their operational needs.

NSN Information for Part Number D6002921-1 with NSN 5905-01-342-0717, 5905013420717

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-342-0717 Item Description: Resistor Variable Nonwire Wound	5905	013420717	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			G
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
D6002921-1	5	9	3

Characteristics Data of NSN 5905-01-342-0717, 5905013420717

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1
AAQL	BODY STYLE	RECTANGULAR BUSHING MOUNTED
ABJT	TERMINAL LENGTH	0.250 INCHES MINIMUM
ABXF	SHAFT LENGTH	1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
ADAQ	BODY LENGTH	0.781 INCHES NOMINAL
ADAT	BODY WIDTH	0.475 INCHES MINIMUM AND 0.525 INCHES MAXIMUM
ADAU	BODY HEIGHT	0.500 INCHES NOMINAL
AEDX	SHAFT STYLE	ROUND
AEEA	SWITCH TYPE	PUSH-PULL
AEED	SWITCH VOLTAGE RATING IN VOLTS	30.0
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFK	MAXIMUM STARTING TORQUE	3.00 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	3.00 INCH-OUNCES
AEFN	NONTURN DEVICE LOCATION	AT 4 OCLOCK AND AT 8 OCLOCK
AEFP	NONTURN DEVICE RADIUS	0.500 INCHES NOMINAL
AEGJ	SWITCH CONTACT ARRANGEMENT	SINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED
AFJN	III FRAGILITY FACTOR	MODERATELY RUGGED
AGAV	III END ITEM IDENTIFICATION	5895-01-233-2919 COMMUNICATION SYSTEM CONTROL GROUP
AJYN	SCREW THREAD DIAMETER	0.250 INCHES NOMINAL
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0
APXH	TERMINAL LOCATION	LOWER ADJACENT SIDE SINGLE ROW
CBBL	FEATURES PROVIDED	HUMIDITY PROOF AND SWITCH
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 FREE AIR SINGLE SECTION
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
PMLC	III PRECIOUS MATERIAL AND LOCATION	TERMINAL SURFACES GOLD
TEST	TEST DATA DOCUMENT	57045-D6002921 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA
TTQY	TERMINAL TYPE AND QUANTITY	3 PIN
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
AEFM	MAXIMUM STOP TORQUE	48.00 INCH-OUNCES
AEGH	SWITCH OPERATING POSITION	ANY POSITION OF ROTATION TRAVEL
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS
ABWV	SHAFT DIAMETER	0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
ADAP	MOUNTING BUSHING LENGTH	0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF
PRMT	III PRECIOUS MATERIAL	GOLD
AEDZ	SHAFT BEARING TYPE	SLEEVE
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	290.0 MINIMUM AND 300.0 MAXIMUM
AEHT	CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.200 INCHES NOMINAL
AXGY	MOUNTING METHOD	STANDARD BUSHING
CBME	III CUBIC MEASURE	0.195 CUBIC INCHES
CQCC	ELECTRICAL RESISTANCE PER SECTION	10.0 KILOHMS SINGLE SECTION
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	290.0 MINIMUM AND 300.0 MAXIMUM
CQCM	CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.100 INCHES NOMINAL
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-150.0 TO 150.0 SINGLE SECTION
CSDK	SWITCH CURRENT TYPE AND RATING IN AMPS	0.250 DC

Related NSN Components of D6002921-1

D60-000-1 1 2 Guide Valve Stem
4820014319108 (4820-01-431-9108)
Danco Valve Company, CAGE Code 65079
4820 Valves Nonpowered

D60-000-1 1 2 Valve Safety Relief
4820014319105 (4820-01-431-9105)
Danco Valve Company, CAGE Code 65079
4820 Valves Nonpowered

D60-000-1 1 2 Stem Fluid Valve
4820014319211 (4820-01-431-9211)
Danco Valve Company, CAGE Code 65079
4820 Valves Nonpowered

D60-000-1 1 2 Seat Valve
4820014474585 (4820-01-447-4585)
Danco Valve Company, CAGE Code 65079
4820 Valves Nonpowered

D60 000 1 1 2 Disk Valve
4820014474587 (4820-01-447-4587)
Danco Valve Company, CAGE Code 65079
4820 Valves Nonpowered

D60-000-1 1 2 I Nut Self Locking Hexagon
5310000506646 (5310-00-050-6646)
Danco Valve Company, CAGE Code 65079
5310 Nuts and Washers

D60-000-1 1 2 ITEM 10 75-110 PSI Spring Helical Compression
5360014218338 (5360-01-421-8338)
Danco Valve Company, CAGE Code 65079
5360 Coil Flat Leaf and Wire Springs

D60-000-1 1 2 ITEM 10 75-110 PSI Spring Helical Compression
5360014218338 (5360-01-421-8338)
Dante Valve Company Inc, CAGE Code 5P967
5360 Coil Flat Leaf and Wire Springs

D60-000-1 1 2 ITEM 19 Bolt Machine
5306013796533 (5306-01-379-6533)
Danco Valve Company, CAGE Code 65079
5306 Bolts

A Complete NSN Part Purchasing Platform

AS9120B and ISO 9001:2015
Aviation Suppliers Association Member
FAA AC 0056B Accredited
AS 6081:2012 Certification
ESD S20.20-2014 Certification