Request a Quote on Honeywell International Inc Part Number 1789051-3 with the NSN 5990-00-829-2588 Today!

Part Number: 1789051-3

Alternate P/N: 17890513

Manufacturer: Honeywell International Inc

NSN: 5990-00-829-2588

NIIN: 008292588

Item Name : Synchro Receiver

CAGE Code: 96774

FSC: 5990 Synchros and Resolvers

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

Thank you for taking an interest in the Synchro Receiver NSN parts that we carry here on Buy Military Ground Vehicle Parts. You have reached the RFQ page for part number 1789051-3, an item that traces back to the manufacturer Honeywell International Inc. Listed with NSN 5990008292588, this listing is available for purchase from our website at any time. If you are interested in part number 1789051-3 and wish to learn more, be sure to fill out and submit the RFQ form found on this page. By presenting us information such as your target price and expected delivery date, we can best formulate and present a solution that closely caters to your unique needs and restrictions alike.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Customer Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Note : We Will Not Share Your Information To Any Third Parties.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To make the part searching process as simple as possible, we choose to list offerings with as much relevant information as we can. For example, while part number 1789051-3 is manufactured by Honeywell International Inc, it is specifically listed along with CAGE Code 96774. With this identifier, you can trace this item back to the exact facility it was sourced from. Additionally, with the NSN 5990-00-829-2588, this signifies that the product belongs to the Federal Supply Class 5990 Synchros and Resolvers. Alongside our easy-to-navigate database, we also offer highly competitive pricing and rapid lead times for the benefit of our customers. Get in touch with an industry expert today and see why so many customers steadily depend on us for their operational needs.

NSN Information for Part Number 1789051-3 with NSN 5990-00-829-2588, 5990008292588

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-829-2588 Item Description: SYNCHRO,RECEIVER	5990	008292588	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1789051-3	3	2	3

Characteristics Data of NSN 5990-00-829-2588, 5990008292588

MRC	Criteria	Characteristic
AAFZ	BODY MATERIAL	STEEL, CORROSION RESISTING"
AAQL	BODY STYLE	STANDARD ROUND C"
AAVH	SHOULDER DIAMETER	0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM"
AAVL	PILOT DIAMETER	0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM"
ABHP	OVERALL LENGTH	1.0570 INCHES NOMINAL"
ABKK	FLANGE DIAMETER	1.0590 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM"
ABKU	FLANGE THICKNESS	0.0930 INCHES NOMINAL"
ABPA	UNDERCUT DIAMETER	0.9750 INCHES NOMINAL"
ABPC	UNDERCUT WIDTH	0.0500 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT"
ABXF	SHAFT LENGTH	0.4370 INCHES NOMINAL SINGLE SHAFT"
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED"
AJSL	BODY SIZE	11"
AJSR	ROTOR INPUT VOLTAGE RATING IN VOLTS	26.0 NOMINAL"
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL"
AJST	ROTOR INPUT CURRENT RATING	220.0 MILLIAMPERES NOMINAL"
AJSV	ROTOR INPUT ELECTRICAL POWER RATING	1.0 WATTS NOMINAL"
AJSW	ZRO RESISTANCE IN OHMS	20.80 NOMINAL"
AJSY	ZSO RESISTANCE IN OHMS	6.40 NOMINAL"
AJTA	ZRS RESISTANCE IN OHMS	25.00 NOMINAL"
AJTS	ROTOR DC RESISTANCE IN OHMS	8.00 NOMINAL"
AJTT	STATOR DC RESISTANCE IN OHMS	4.10 NOMINAL"
AJVF	PHASE SHIFT ANGLE IN DEG	2.500 INPUT TO OUTPUT NOMINAL"
AJVV	TORQUE GRADIENT PER ANGULAR DEG	4400.0 MILLIMETER-MILLIGRAMS NOMINAL"
AJVW	ALIGNMENT HOLE QUANTITY	4"
AJWQ	PILOT LENGTH	0.0620 INCHES NOMINAL"
AJWR	SHOULDER LENGTH	0.0620 INCHES NOMINAL"
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.6200 INCHES NOMINAL"
CQTM	TERMINAL LOCATION	REAR"
CQXQ	PLUS J ZRO REACTANCE IN OHMS	116.00 NOMINAL"
CRGZ	PLUS J ZSO REACTANCE IN OHMS	20.00 NOMINAL"
CRJX	SHAFT TAPERED END MINOR DIAMETER	0.1090 INCHES MINIMUM SINGLE SHAFT AND 0.1100 INCHES MAXIMUM SINGLE SHAFT"
CRKL	PLUS J ZRS REACTANCE IN OHMS	12.00 NOMINAL"
CRSJ	SHAFT TYPE	ROUND, TAPERED SINGLE SHAFT"
CRSY	ALIGNMENT HOLE DEPTH	0.0900 INCHES MAXIMUM"
CSLT	SHAFT TAPER ANGLE IN DEG	3.0 SINGLE SHAFT"
CTCW	ALIGNMENT HOLE BOLT CIRCLE DIAMETER	0.8120 INCHES NOMINAL"
CWAC	SHAFT TAPER LENGTH	0.1450 INCHES NOMINAL SINGLE SHAFT"
TTQY	TERMINAL TYPE AND QUANTITY	4 WIRE LEAD"
AAFZ	BODY MATERIAL	STEEL, CORROSION RESISTING"
AAQL	BODY STYLE	STANDARD ROUND C"
AAVH	SHOULDER DIAMETER	0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM"
AAVL	PILOT DIAMETER	0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM"
ABHP	OVERALL LENGTH	1.0570 INCHES NOMINAL"
ABKK	FLANGE DIAMETER	1.0590 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM"
ABKU	FLANGE THICKNESS	0.0930 INCHES NOMINAL"
ABPA	UNDERCUT DIAMETER	0.9750 INCHES NOMINAL"
ABPC	UNDERCUT WIDTH	0.0500 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT"
ABXF	SHAFT LENGTH	0.4370 INCHES NOMINAL SINGLE SHAFT"
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED"
AJSL	BODY SIZE	11"
AJSR	ROTOR INPUT VOLTAGE RATING IN VOLTS	26.0 NOMINAL"
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL"
AJST	ROTOR INPUT CURRENT RATING	220.0 MILLIAMPERES NOMINAL"
AJSV	ROTOR INPUT ELECTRICAL POWER RATING	1.0 WATTS NOMINAL"
AJSW	ZRO RESISTANCE IN OHMS	20.80 NOMINAL"
AJSY	ZSO RESISTANCE IN OHMS	6.40 NOMINAL"
AJTA	ZRS RESISTANCE IN OHMS	25.00 NOMINAL"
AJTS	ROTOR DC RESISTANCE IN OHMS	8.00 NOMINAL"
AJTT	STATOR DC RESISTANCE IN OHMS	4.10 NOMINAL"
AJVF	PHASE SHIFT ANGLE IN DEG	2.500 INPUT TO OUTPUT NOMINAL"
AJVV	TORQUE GRADIENT PER ANGULAR DEG	4400.0 MILLIMETER-MILLIGRAMS NOMINAL"
AJVW	ALIGNMENT HOLE QUANTITY	4"
AJWQ	PILOT LENGTH	0.0620 INCHES NOMINAL"
AJWR	SHOULDER LENGTH	0.0620 INCHES NOMINAL"
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.6200 INCHES NOMINAL"
CQTM	TERMINAL LOCATION	REAR"
CQXQ	PLUS J ZRO REACTANCE IN OHMS	116.00 NOMINAL"
CRGZ	PLUS J ZSO REACTANCE IN OHMS	20.00 NOMINAL"
CRJX	SHAFT TAPERED END MINOR DIAMETER	0.1090 INCHES MINIMUM SINGLE SHAFT AND 0.1100 INCHES MAXIMUM SINGLE SHAFT"
CRKL	PLUS J ZRS REACTANCE IN OHMS	12.00 NOMINAL"
CRSJ	SHAFT TYPE	ROUND, TAPERED SINGLE SHAFT"
CRSY	ALIGNMENT HOLE DEPTH	0.0900 INCHES MAXIMUM"
CSLT	SHAFT TAPER ANGLE IN DEG	3.0 SINGLE SHAFT"
CTCW	ALIGNMENT HOLE BOLT CIRCLE DIAMETER	0.8120 INCHES NOMINAL"
CWAC	SHAFT TAPER LENGTH	0.1450 INCHES NOMINAL SINGLE SHAFT"
TTQY	TERMINAL TYPE AND QUANTITY	4 WIRE LEAD"