Request a Quote on Kamatics Corporation Part Number KDP328-12-066C with the NSN 3120-01-333-9997 Today!

Part Number: KDP328-12-066C
Alternate P/N: KDP32812066C
Manufacturer: Kamatics Corporation
NIIN: 013339997
Item Name : Bearing Sleeve
CAGE Code: 50632
FSG: 31 Bearings
Country: USA
NCB Code: 01

Thank you for taking an interest in the Bearing Sleeve NSN parts that we carry here on Buy Military Ground Vehicle Parts. You have reached the RFQ page for part number KDP328-12-066C, an item that traces back to the manufacturer Kamatics Corporation. Listed with NSN 3120013339997, this listing is available for purchase from our website at any time. If you are interested in part number KDP328-12-066C and wish to learn more, be sure to fill out and submit the RFQ form found on this page. By presenting us information such as your target price and expected delivery date, we can best formulate and present a solution that closely caters to your unique needs and restrictions alike.

Product Details

“*” Required Fields Are Compulsory

Contact Information

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Customer Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Note : We Will Not Share Your Information To Any Third Parties.

Upload RFQ SHEET

To make the part searching process as simple as possible, we choose to list offerings with as much relevant information as we can. For example, while part number KDP328-12-066C is manufactured by Kamatics Corporation, it is specifically listed along with CAGE Code 50632. With this identifier, you can trace this item back to the exact facility it was sourced from. Additionally, with the NSN 3120-01-333-9997, this signifies that the product belongs to the Federal Supply Class 3120 Bearings Plain Unmounted. Alongside our easy-to-navigate database, we also offer highly competitive pricing and rapid lead times for the benefit of our customers. Get in touch with an industry expert today and see why so many customers steadily depend on us for their operational needs. 

NSN Information for Part Number KDP328-12-066C with NSN 3120-01-333-9997, 3120013339997

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3120-01-333-9997

Item PartTypeName:

BEARING,SLEEVE

31200133399970N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
KDP328-12-066C515

Characteristics Data of NSN 3120-01-333-9997, 3120013339997

MRCCriteriaCharacteristic
AEPRFLANGE OUTSIDE DIAMETER1.1600 INCHES MINIMUM AND 1.1800 INCHES MAXIMUM
CQFMHARDNESS RATING28.0 ROCKWELL C MINIMUM OUTSIDE DIAMETER SURFACE OF BODY AND 37.0 ROCKWELL C MAXIMUM OUTSIDE DIAMETER SURFACE OF BODY
MATTMATERIALSTEEL COMP 630 OUTSIDE DIAMETER SURFACE OF BODY
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF LEFT FLANGE
ABHPOVERALL LENGTH0.7220 INCHES NOMINAL
BZLXCORNER SHAPECHAMFERED INSIDE RIGHT CORNER
BZLXCORNER SHAPESQUARE OUTSIDE LEFT CORNER
BZLXCORNER SHAPESQUARE OUTSIDE RIGHT CORNER
BZLXCORNER SHAPEUNDERCUT LEFT FLANGE OUTSIDE RIGHT CORNER
MATTMATERIALSTEEL COMP 630 LARGEST OUTSIDE DIAMETER
MATTMATERIALSTEEL COMP 630 RIGHT END SURFACE OF BODY
MATTMATERIALSTEEL COMP 630 RIGHT END SURFACE OF LEFT FLANGE
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF BODY
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE INSIDE DIAMETER SURFACE OF BODY
SFTTSURFACE TREATMENTCADMIUM OUTSIDE DIAMETER SURFACE OF FLANGE AND CHROMATE OUTSIDE DIAMETER SURFACE OF FLANGE
SFTTSURFACE TREATMENTCADMIUM RIGHT END SURFACE OF BODY AND CHROMATE RIGHT END SURFACE OF BODY
ADASBODY INSIDE DIAMETER0.7390 INCHES MINIMUM AND 0.7410 INCHES MAXIMUM
CQFMHARDNESS RATING28.0 ROCKWELL C MINIMUM OUTSIDE DIAMETER SURFACE OF FLANGE AND 37.0 ROCKWELL C MAXIMUM OUTSIDE DIAMETER SURFACE OF FLANGE
SFTTSURFACE TREATMENTCADMIUM RIGHT END SURFACE OF LEFT FLANGE AND CHROMATE RIGHT END SURFACE OF LEFT FLANGE
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE
STYLSTYLE DESIGNATORSOLID,EXTERNAL FLANGE ONE END
ZZZKSPECIFICATION/STANDARD DATA80632-04A061 MANUFACTURERS STANDARD
ADARBODY OUTSIDE DIAMETER0.9388 INCHES MINIMUM AND 0.9394 INCHES MAXIMUM
AGFFFLANGE WIDTH0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
BZLXCORNER SHAPESQUARE INSIDE LEFT CORNER
CQFMHARDNESS RATING28.0 ROCKWELL C MINIMUM LEFT END SURFACE OF BODY AND FLANGE AND 37.0 ROCKWELL C MAXIMUM LEFT END SURFACE OF BODY AND FLANGE
CQFMHARDNESS RATING28.0 ROCKWELL C MINIMUM RIGHT END SURFACE OF BODY AND 37.0 ROCKWELL C MAXIMUM RIGHT END SURFACE OF BODY
CQFMHARDNESS RATING28.0 ROCKWELL C MINIMUM RIGHT END SURFACE OF LEFT FLANGE AND 37.0 ROCKWELL C MAXIMUM RIGHT END SURFACE OF LEFT FLANGE
MATTMATERIALPLASTIC POLYTETRAFLUOROETHYLENE INSIDE DIAMETER SURFACE OF BODY AND PLASTIC POLYAMIDE INSIDE DIAMETER SURFACE OF BODY AND PLASTIC PHENOLIC INSIDE DIAMETER SURFACE OF BODY
MATTMATERIALSTEEL COMP 630 LEFT END SURFACE OF BODY AND FLANGE
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
SFTTSURFACE TREATMENTCADMIUM OUTSIDE DIAMETER SURFACE OF BODY AND CHROMATE OUTSIDE DIAMETER SURFACE OF BODY
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY

Related NSN Components of KDP328-12-066C

A Complete NSN Part Purchasing Platform

  • AS9120B and ISO 9001:2015
  • Aviation Suppliers Association Member
  • FAA AC 0056B Accredited
  • AS 6081:2012 Certification
  • ESD S20.20-2014 Certification

Thank You for Visiting.

If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.