Request a Quote on Lockheed Martin Corporation Part Number 2303002 with the NSN 5905-00-995-6000 Today!

Part Number: 2303002

Manufacturer: Lockheed Martin Corporation

NSN: 5905-00-995-6000

NIIN: 009956000

Item Name : Resistor Variable Wire Wound Pre

CAGE Code: 56232

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

Thank you for taking an interest in the Resistor Variable Wire Wound Pre NSN parts that we carry here on Buy Military Ground Vehicle Parts. You have reached the RFQ page for part number 2303002, an item that traces back to the manufacturer Lockheed Martin Corporation. Listed with NSN 5905009956000, this listing is available for purchase from our website at any time. If you are interested in part number 2303002 and wish to learn more, be sure to fill out and submit the RFQ form found on this page. By presenting us information such as your target price and expected delivery date, we can best formulate and present a solution that closely caters to your unique needs and restrictions alike.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Customer Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Note : We Will Not Share Your Information To Any Third Parties.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To make the part searching process as simple as possible, we choose to list offerings with as much relevant information as we can. For example, while part number 2303002 is manufactured by Lockheed Martin Corporation, it is specifically listed along with CAGE Code 56232. With this identifier, you can trace this item back to the exact facility it was sourced from. Additionally, with the NSN 5905-00-995-6000, this signifies that the product belongs to the Federal Supply Class 5905 Resistors. Alongside our easy-to-navigate database, we also offer highly competitive pricing and rapid lead times for the benefit of our customers. Get in touch with an industry expert today and see why so many customers steadily depend on us for their operational needs.

NSN Information for Part Number 2303002 with NSN 5905-00-995-6000, 5905009956000

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-00-995-6000 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE	5905	009956000	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			S
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
2303002	C	2	3

Characteristics Data of NSN 5905-00-995-6000, 5905009956000

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	4
AAQL	BODY STYLE	CYLINDRICAL SERVO MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
AAVL	PILOT DIAMETER	1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM
AAVM	PILOT LENGTH	0.0730 INCHES MINIMUM
ABHP	OVERALL LENGTH	3.336 INCHES MAXIMUM
ABPA	UNDERCUT DIAMETER	1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM
ABPC	UNDERCUT WIDTH	0.0620 INCHES NOMINAL
ABPM	BODY DIAMETER	1.453 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM
ABXF	SHAFT LENGTH	0.687 INCHES NOMINAL
ADAQ	BODY LENGTH	2.617 INCHES MAXIMUM
ADAV	OVERALL DIAMETER	1.707 INCHES MAXIMUM
AECZ	MOUNTING LIP DIAMETER	1.4380 INCHES NOMINAL
AEDA	MOUNTING LIP DEPTH	0.0930 INCHES NOMINAL
AEDX	SHAFT STYLE	ROUND,SLOTTED
AEDZ	SHAFT BEARING TYPE	BALL
AEFD	ACTUATOR TYPE	DOUBLE ENDED SHAFT
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	354.0 NOMINAL
AEFK	MAXIMUM STARTING TORQUE	2.80 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	2.00 INCH-OUNCES
AEFZ	SHAFT RUNOUT	0.001 INCHES
AFJN	FRAGILITY FACTOR	MODERATELY DELICATE
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGY	MOUNTING METHOD	CLAMP RING
CQCC	ELECTRICAL RESISTANCE PER SECTION	9.75 KILOHMS 1ST SECTION AND 9.75 KILOHMS 2ND SECTION AND 550.0 OHMS 3RD SECTION AND 1.1 KILOHMS 4TH SECTION
CQCH	TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION	172.5 1ST SECTION AND 172.5 2ND SECTION
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	360.0 NOMINAL
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.15 TO 0.15 1ST SECTION AND-0.15 TO 0.15 2ND SECTION AND-0.50 TO 0.50 3RD SECTION AND-0.50 TO 0.50 4TH SECTION
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 ALL SECTIONS
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR ALL SECTIONS
CRGM	FUNCTION CONFORMITY PER SECTION	ALL SECTIONS ABSOLUTE LINEARITY
CRJS	FIXED TAP QUANTITY PER SECTION	1 1ST SECTION AND 1 2ND SECTION
CRKS	TAP LOCATION TOLERANCE PER SECTION	-0.5 TO 0.5 DEG ANGULAR ROTATION 1ST SECTION AND-0.5 TO 0.5 DEG ANGULAR ROTATION 2ND SECTION
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-1.0 TO 1.0 1ST SECTION AND-1.0 TO 1.0 2ND SECTION AND-5.0 TO 5.0 3RD SECTION AND-5.0 TO 5.0 4TH SECTION
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CONTINUOUS MOTION
CSBX	FUNCTION CHARACTERISTIC PER SECTION	ALL SECTIONS LINEAR
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	40.0 ALL SECTIONS
PRMT	PRECIOUS MATERIAL	SILVER
TEST	TEST DATA DOCUMENT	10001-2303002 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW
TTQY	TERMINAL TYPE AND QUANTITY	14 TURRET

Related NSN Components of 2303002

230 0 001 Hose Assembly Nonmetallic
4720016658448 (4720-01-665-8448)
Maritime Applied Physics Corporation, CAGE Code 0E3P8
4720 Hose and Tubing Flexible

230-0-001 Valve Ball
4820016061787 (4820-01-606-1787)
Maritime Applied Physics Corporation, CAGE Code 0E3P8
4820 Valves Nonpowered

230-0-001 ITEM NO.5 Parts Kit Ball Valve
4820016045098 (4820-01-604-5098)
Maritime Applied Physics Corporation, CAGE Code 0E3P8
4820 Valves Nonpowered

230-0-001 ITEM NO.7 Parts Kit Ball Valve
4820016060246 (4820-01-606-0246)
Maritime Applied Physics Corporation, CAGE Code 0E3P8
4820 Valves Nonpowered

230-0-001 REV B IEM NO.11 Valve Linear Directional Control
4820016107112 (4820-01-610-7112)
Maritime Applied Physics Corporation, CAGE Code 0E3P8
4820 Valves Nonpowered

230-0-001 REV B ITEM NO.10 Manifold Hydraulic
4730016023932 (4730-01-602-3932)
Maritime Applied Physics Corporation, CAGE Code 0E3P8
4730 Hose Pipe Tube Lubrication and Railing Fittings

230-0-001 REV B ITEM NO.16 Hose Assembly Nonmetallic
4720016020536 (4720-01-602-0536)
Maritime Applied Physics Corporation, CAGE Code 0E3P8
4720 Hose and Tubing Flexible

230-0-001 REV B ITEM NO.17 Hose Assembly Nonmetallic
4720016020541 (4720-01-602-0541)
Maritime Applied Physics Corporation, CAGE Code 0E3P8
4720 Hose and Tubing Flexible

230-0-001 REV B ITEM NO.18 Hose Assembly Nonmetallic
4720016020540 (4720-01-602-0540)
Maritime Applied Physics Corporation, CAGE Code 0E3P8
4720 Hose and Tubing Flexible

Part 2303002 With Different Manufacturers

2303002

RFQ

A Complete NSN Part Purchasing Platform

AS9120B and ISO 9001:2015
Aviation Suppliers Association Member
FAA AC 0056B Accredited
AS 6081:2012 Certification
ESD S20.20-2014 Certification