Request a Quote on New Hampshire Ball Bearings Inc Part Number NH7505A7-020 with the NSN 3120-01-144-3961 Today!

Part Number: NH7505A7-020

Alternate P/N: NH7505A7020

Manufacturer: New Hampshire Ball Bearings Inc

NSN: 3120-01-144-3961

NIIN: 011443961

Item Name : Bearing Sleeve

CAGE Code: 15860

FSC: 3120 Bearings Plain Unmounted

FSG: 31 Bearings

Country: USA

NCB Code: 01

Thank you for taking an interest in the Bearing Sleeve NSN parts that we carry here on Buy Military Ground Vehicle Parts. You have reached the RFQ page for part number NH7505A7-020, an item that traces back to the manufacturer New Hampshire Ball Bearings Inc. Listed with NSN 3120011443961, this listing is available for purchase from our website at any time. If you are interested in part number NH7505A7-020 and wish to learn more, be sure to fill out and submit the RFQ form found on this page. By presenting us information such as your target price and expected delivery date, we can best formulate and present a solution that closely caters to your unique needs and restrictions alike.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Customer Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Note : We Will Not Share Your Information To Any Third Parties.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To make the part searching process as simple as possible, we choose to list offerings with as much relevant information as we can. For example, while part number NH7505A7-020 is manufactured by New Hampshire Ball Bearings Inc, it is specifically listed along with CAGE Code 15860. With this identifier, you can trace this item back to the exact facility it was sourced from. Additionally, with the NSN 3120-01-144-3961, this signifies that the product belongs to the Federal Supply Class 3120 Bearings Plain Unmounted. Alongside our easy-to-navigate database, we also offer highly competitive pricing and rapid lead times for the benefit of our customers. Get in touch with an industry expert today and see why so many customers steadily depend on us for their operational needs.

Characteristics Data of NSN 3120-01-144-3961, 3120011443961

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	0.2520 INCHES MINIMUM AND 0.2670 INCHES MAXIMUM"
ADAR	BODY OUTSIDE DIAMETER	0.5633 INCHES MINIMUM AND 0.5638 INCHES MAXIMUM"
ADAS	BODY INSIDE DIAMETER	0.4380 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM"
AEPR	FLANGE OUTSIDE DIAMETER	0.6770 INCHES MINIMUM AND 0.6970 INCHES MAXIMUM"
AGFF	FLANGE WIDTH	0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM"
BZLX	CORNER SHAPE	SQUARE INSIDE LEFT CORNER"
BZLX	CORNER SHAPE	SQUARE INSIDE RIGHT CORNER"
BZLX	CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER"
BZLX	CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER"
BZLX	CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER"
BZLX	CORNER SHAPE	UNDERCUT LEFT FLANGE BODY CORNER"
CSYM	SURFACE FINISH	63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY"
MATT	MATERIAL	ALUMINUM ALLOY 2024 OUTER LAYER"
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER"
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE LEFT END SURFACE OF BODY AND FLANGE"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE INNER LAYER AND MIL-B-81934/2 MIL SPEC SINGLE MATERIAL RESPONSE INNER LAYER"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE AND MIL-B-81934/2 MIL SPEC SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/6,COND T851 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER OR QQ-A-200/3,COND T8511 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER"
SFTT	SURFACE TREATMENT	ANODIZE OUTER LAYER OR CHROMATE OUTER LAYER"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OUTER LAYER OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OUTER LAYER"
STYL	STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END"
ZZZK	SPECIFICATION/STANDARD DATA	81755-C7505 MANUFACTURERS STANDARD"
ABHP	OVERALL LENGTH	0.2520 INCHES MINIMUM AND 0.2670 INCHES MAXIMUM"
ADAR	BODY OUTSIDE DIAMETER	0.5633 INCHES MINIMUM AND 0.5638 INCHES MAXIMUM"
ADAS	BODY INSIDE DIAMETER	0.4380 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM"
AEPR	FLANGE OUTSIDE DIAMETER	0.6770 INCHES MINIMUM AND 0.6970 INCHES MAXIMUM"
AGFF	FLANGE WIDTH	0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM"
BZLX	CORNER SHAPE	SQUARE INSIDE LEFT CORNER"
BZLX	CORNER SHAPE	SQUARE INSIDE RIGHT CORNER"
BZLX	CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER"
BZLX	CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER"
BZLX	CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER"
BZLX	CORNER SHAPE	UNDERCUT LEFT FLANGE BODY CORNER"
CSYM	SURFACE FINISH	63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY"
MATT	MATERIAL	ALUMINUM ALLOY 2024 OUTER LAYER"
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER"
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE LEFT END SURFACE OF BODY AND FLANGE"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE INNER LAYER AND MIL-B-81934/2 MIL SPEC SINGLE MATERIAL RESPONSE INNER LAYER"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE AND MIL-B-81934/2 MIL SPEC SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/6,COND T851 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER OR QQ-A-200/3,COND T8511 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER"
SFTT	SURFACE TREATMENT	ANODIZE OUTER LAYER OR CHROMATE OUTER LAYER"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OUTER LAYER OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OUTER LAYER"
STYL	STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END"
ZZZK	SPECIFICATION/STANDARD DATA	81755-C7505 MANUFACTURERS STANDARD"