Request a Quote on Northrop Grumman Systems Corporation Part Number 905J341-301 with the NSN 3040-00-585-3505 Today!

Part Number: 905J341-301

Alternate P/N: 905J341301

Manufacturer: Northrop Grumman Systems Corporation

NSN: 3040-00-585-3505

NIIN: 005853505

Item Name : Worm Shaft

CAGE Code: 90099

FSC: 3040 Miscellaneous Power Transmission Equipment

FSG: 30 Mechanical Power Transmission Equipment

Country: USA

NCB Code: 00

Thank you for taking an interest in the Worm Shaft NSN parts that we carry here on Buy Military Ground Vehicle Parts. You have reached the RFQ page for part number 905J341-301, an item that traces back to the manufacturer Northrop Grumman Systems Corporation. Listed with NSN 3040005853505, this listing is available for purchase from our website at any time. If you are interested in part number 905J341-301 and wish to learn more, be sure to fill out and submit the RFQ form found on this page. By presenting us information such as your target price and expected delivery date, we can best formulate and present a solution that closely caters to your unique needs and restrictions alike.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Customer Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Note : We Will Not Share Your Information To Any Third Parties.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To make the part searching process as simple as possible, we choose to list offerings with as much relevant information as we can. For example, while part number 905J341-301 is manufactured by Northrop Grumman Systems Corporation, it is specifically listed along with CAGE Code 90099. With this identifier, you can trace this item back to the exact facility it was sourced from. Additionally, with the NSN 3040-00-585-3505, this signifies that the product belongs to the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. Alongside our easy-to-navigate database, we also offer highly competitive pricing and rapid lead times for the benefit of our customers. Get in touch with an industry expert today and see why so many customers steadily depend on us for their operational needs.

NSN Information for Part Number 905J341-301 with NSN 3040-00-585-3505, 3040005853505

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3040-00-585-3505 Item PartTypeName: WORM SHAFT	3040	005853505	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
905J341PC301	5	2	5

Characteristics Data of NSN 3040-00-585-3505, 3040005853505

MRC	Criteria	Characteristic
AAHN	END SIMILARITY	NOT IDENTICAL
AASA	THREAD LENGTH	0.688 INCHES NOMINAL EITHER END,EIGHTH PORTION
AASA	THREAD LENGTH	0.688 INCHES NOMINAL EITHER END,THIRD PORTION
ABHP	OVERALL LENGTH	30.125 INCHES NOMINAL
ABRR	KEYWAY WIDTH	0.313 INCHES NOMINAL EITHER END,EIGHTH PORTION
ABRR	KEYWAY WIDTH	0.313 INCHES NOMINAL EITHER END,THIRD PORTION
AJYP	SCREW THREAD SERIES DESIGNATOR	SPECIAL EITHER END,EIGHTH PORTION
AJYP	SCREW THREAD SERIES DESIGNATOR	SPECIAL EITHER END,THIRD PORTION
AKAF	SHAFT THREAD DIRECTION	RIGHT-HAND EITHER END,EIGHTH PORTION
AKAF	SHAFT THREAD DIRECTION	RIGHT-HAND EITHER END,THIRD PORTION
BDGL	DISTANCE FROM RADIAL CENTER TO FLAT SURFACE	1.000 INCHES NOMINAL EITHER END,FIFTH PORTION
BYFR	TEETH HARDNESS RATING	56.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM
CFFB	WORM THREAD QUANTITY	1
CFFC	WORM THREAD LEAD	1.625 INCHES NOMINAL
CFFD	WORM THREAD DIRECTION	RIGHT-HAND
CFFF	WORM PRESSURE ANGLE IN DEG	20.000
CFFG	WORM HELIX ANGLE	7 DEG 42 MIN
CFFK	WORM OUTSIDE DIAMETER	4.862 INCHES NOMINAL
CFFL	WORM PITCH DIAMETER	3.448 INCHES NOMINAL
CFFM	SHAFT HARDNESS RATING	C SCALE 24
CFFN	WORM THREAD SECTION LENGTH	8.000 INCHES NOMINAL
CFFP	WORM BODY LENGTH	8.000 INCHES NOMINAL
CFFQ	WORM BODY TAPERED BEARING SURFACE END	NOT PROVIDED
CFFW	SHAFT LOCATION	BOTH ENDS OF WORM
CFFX	STRAIGHT UNTHREADED LENGTH	0.250 INCHES NOMINAL EITHER END,FOURTH PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	1.063 INCHES NOMINAL EITHER END,SEVENTH PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	2.438 INCHES NOMINAL EITHER END,SIXTH PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	2.625 INCHES NOMINAL EITHER END,FIRST PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	2.875 INCHES NOMINAL EITHER END,SECOND PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	7.125 INCHES NOMINAL EITHER END,ELEVENTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	0.750 INCHES NOMINAL EITHER END,FIRST PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.001 INCHES MAXIMUM EITHER END,NINTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.874 INCHES MINIMUM EITHER END,ELEVENTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.875 INCHES MAXIMUM EITHER END,ELEVENTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.999 INCHES MINIMUM EITHER END,FOURTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.999 INCHES MINIMUM EITHER END,NINTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.001 INCHES MAXIMUM EITHER END,FOURTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.5588 INCHES MINIMUM EITHER END,SECOND PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.5594 INCHES MAXIMUM EITHER END,SECOND PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.625 INCHES NOMINAL EITHER END,SIXTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.651 INCHES MINIMUM EITHER END,SEVENTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.656 INCHES MAXIMUM EITHER END,SEVENTH PORTION
CFFZ	UNTHREADED SECTION KEYWAY WIDTH	0.3130 INCHES NOMINAL EITHER END,SECOND PORTION
CFFZ	UNTHREADED SECTION KEYWAY WIDTH	0.3130 INCHES NOMINAL EITHER END,SEVENTH PORTION
CFFZ	UNTHREADED SECTION KEYWAY WIDTH	0.4940 INCHES MINIMUM EITHER END,ELEVENTH PORTION
CFFZ	UNTHREADED SECTION KEYWAY WIDTH	0.4960 INCHES MAXIMUM EITHER END,ELEVENTH PORTION
CFGB	UNTHREADED SECTION KEYWAY DEPTH	0.125 INCHES NOMINAL EITHER END,SECOND PORTION
CFGB	UNTHREADED SECTION KEYWAY DEPTH	0.125 INCHES NOMINAL EITHER END,SEVENTH PORTION
CFGB	UNTHREADED SECTION KEYWAY DEPTH	0.265 INCHES NOMINAL EITHER END,ELEVENTH PORTION
CFQQ	SHAFT SECTION SIZE	1.922 INCHESOVERALL DIA EITHER END
CFQR	CIRCULAR PORTION RADIUS	1.688 INCHES NOMINAL EITHER END,FIFTH PORTION
MATT	MATERIAL	STEEL COMP 4620
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7493,COM4620 MIL SPEC SINGLE MATERIAL RESPONSE
ZZZV	FSC APPLICATION DATA	STEAM TURBINE