Request a Quote on Rockwell Automation Ltd Part Number GWL2238 with the NSN 5905-00-755-0860 Today!

Part Number: GWL2238

Manufacturer: Rockwell Automation Ltd

NSN: 5905-00-755-0860

NIIN: 007550860

Item Name : Resistor Variable Nonwire Wound

CAGE Code: 01121

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

Thank you for taking an interest in the Resistor Variable Nonwire Wound NSN parts that we carry here on Buy Military Ground Vehicle Parts. You have reached the RFQ page for part number GWL2238, an item that traces back to the manufacturer Rockwell Automation Ltd. Listed with NSN 5905007550860, this listing is available for purchase from our website at any time. If you are interested in part number GWL2238 and wish to learn more, be sure to fill out and submit the RFQ form found on this page. By presenting us information such as your target price and expected delivery date, we can best formulate and present a solution that closely caters to your unique needs and restrictions alike.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Customer Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Note : We Will Not Share Your Information To Any Third Parties.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To make the part searching process as simple as possible, we choose to list offerings with as much relevant information as we can. For example, while part number GWL2238 is manufactured by Rockwell Automation Ltd, it is specifically listed along with CAGE Code 01121. With this identifier, you can trace this item back to the exact facility it was sourced from. Additionally, with the NSN 5905-00-755-0860, this signifies that the product belongs to the Federal Supply Class 5905 Resistors. Alongside our easy-to-navigate database, we also offer highly competitive pricing and rapid lead times for the benefit of our customers. Get in touch with an industry expert today and see why so many customers steadily depend on us for their operational needs.

NSN Information for Part Number GWL2238 with NSN 5905-00-755-0860, 5905007550860

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-00-755-0860 Item Description: RESISTOR,VARIABLE,NONWIRE WOUND,	5905	007550860	0	N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
GWL2238	3	1	C			9

Characteristics Data of NSN 5905-00-755-0860, 5905007550860

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	OVERALL LENGTH	1.130 INCHES NOMINAL"
ABPM	BODY DIAMETER	0.500 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.410 INCHES MINIMUM AND 0.470 INCHES MAXIMUM"
ADAP	MOUNTING BUSHING LENGTH	0.380 INCHES NOMINAL"
ADAQ	BODY LENGTH	0.450 INCHES NOMINAL"
ADAV	OVERALL DIAMETER	0.500 INCHES NOMINAL"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFL	MAXIMUM RUNNING TORQUE	6.00 INCH-OUNCES"
AEFM	MAXIMUM STOP TORQUE	48.00 INCH-OUNCES"
AEFN	NONTURN DEVICE LOCATION	AT 4'30 OCLOCK AND AT 10'30 OCLOCK"
AEFP	NONTURN DEVICE RADIUS	0.245 INCHES NOMINAL"
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED"
AJYN	SCREW THREAD DIAMETER	0.250 INCHES NOMINAL"
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF"
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0"
APXH	TERMINAL LOCATION	REAR END"
AXGY	MOUNTING METHOD	LOCKING BUSHING"
CBBL	FEATURES PROVIDED	SHAFT LOCKING DEVICE AND SHAFT SEAL"
CQCC	ELECTRICAL RESISTANCE PER SECTION	2.5 MEGOHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	295.0 NOMINAL"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	120.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-20.0/+20.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION"
CSDL	UNABLE TO DECODE	UNABLE TO DECODE"
TEST	TEST DATA DOCUMENT	79500-2JC2779 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW"
TTQY	TERMINAL TYPE AND QUANTITY	3 TAB, SOLDER LUG"
AAPN	SECTION QUANTITY	1"
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED"
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED"
ABHP	OVERALL LENGTH	1.130 INCHES NOMINAL"
ABPM	BODY DIAMETER	0.500 INCHES NOMINAL"
ABWV	SHAFT DIAMETER	0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM"
ABXF	SHAFT LENGTH	0.410 INCHES MINIMUM AND 0.470 INCHES MAXIMUM"
ADAP	MOUNTING BUSHING LENGTH	0.380 INCHES NOMINAL"
ADAQ	BODY LENGTH	0.450 INCHES NOMINAL"
ADAV	OVERALL DIAMETER	0.500 INCHES NOMINAL"
AEDX	SHAFT STYLE	ROUND, SLOTTED"
AEFD	ACTUATOR TYPE	SINGLE SHAFT"
AEFL	MAXIMUM RUNNING TORQUE	6.00 INCH-OUNCES"
AEFM	MAXIMUM STOP TORQUE	48.00 INCH-OUNCES"
AEFN	NONTURN DEVICE LOCATION	AT 4'30 OCLOCK AND AT 10'30 OCLOCK"
AEFP	NONTURN DEVICE RADIUS	0.245 INCHES NOMINAL"
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED"
AJYN	SCREW THREAD DIAMETER	0.250 INCHES NOMINAL"
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF"
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0"
APXH	TERMINAL LOCATION	REAR END"
AXGY	MOUNTING METHOD	LOCKING BUSHING"
CBBL	FEATURES PROVIDED	SHAFT LOCKING DEVICE AND SHAFT SEAL"
CQCC	ELECTRICAL RESISTANCE PER SECTION	2.5 MEGOHMS SINGLE SECTION"
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	295.0 NOMINAL"
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	120.0 SINGLE SECTION"
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 FREE AIR SINGLE SECTION"
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-20.0/+20.0 SINGLE SECTION"
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS"
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION"
CSDL	UNABLE TO DECODE	UNABLE TO DECODE"
TEST	TEST DATA DOCUMENT	79500-2JC2779 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW"
TTQY	TERMINAL TYPE AND QUANTITY	3 TAB, SOLDER LUG"