Request a Quote on Sae International Part Number AS117 with the NSN 4720-01-505-0196 Today!

Part Number: AS117
Manufacturer: Sae International
NIIN: 015050196
CAGE Code: 0U583
FSG: 47 Pipe Tubing Hose and Fittings
Country: USA
NCB Code: 01

Thank you for taking an interest in the Hose Assembly Nonmetallic NSN parts that we carry here on Buy Military Ground Vehicle Parts. You have reached the RFQ page for part number AS117, an item that traces back to the manufacturer Sae International. Listed with NSN 4720015050196, this listing is available for purchase from our website at any time. If you are interested in part number AS117 and wish to learn more, be sure to fill out and submit the RFQ form found on this page. By presenting us information such as your target price and expected delivery date, we can best formulate and present a solution that closely caters to your unique needs and restrictions alike.

Product Details

“*” Required Fields Are Compulsory

Contact Information

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Customer Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Note : We Will Not Share Your Information To Any Third Parties.

Upload RFQ SHEET

To make the part searching process as simple as possible, we choose to list offerings with as much relevant information as we can. For example, while part number AS117 is manufactured by Sae International, it is specifically listed along with CAGE Code 0U583. With this identifier, you can trace this item back to the exact facility it was sourced from. Additionally, with the NSN 4720-01-505-0196, this signifies that the product belongs to the Federal Supply Class 4720 Hose and Tubing Flexible. Alongside our easy-to-navigate database, we also offer highly competitive pricing and rapid lead times for the benefit of our customers. Get in touch with an industry expert today and see why so many customers steadily depend on us for their operational needs. 

NSN Information for Part Number AS117 with NSN 4720-01-505-0196, 4720015050196

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4720-01-505-0196

Item PartTypeName:

HOSE ASSEMBLY,NONMETALLIC

47200150501960NA
CIICHCCESDPMICCriticalityENAC
UAA0
Part NumberISCRNVCRNCCHCCMSDSSADC
AS117-12F0214523

Characteristics Data of NSN 4720-01-505-0196, 4720015050196

MRCCriteriaCharacteristic
AAGRCROSS-SECTIONAL SHAPE STYLEROUND
AAJDTHREAD CLASS3B 1ST END
AAJDTHREAD CLASS3B 2ND END
AAJFTHREAD DIRECTIONRIGHT-HAND 1ST END
AAJFTHREAD DIRECTIONRIGHT-HAND 2ND END
AARXINSIDE DIAMETER0.602 INCHES NOMINAL
ABJHTEMP RATING-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE
ABKVOUTSIDE DIAMETER1.360 INCHES NOMINAL
ACKHMINIMUM INSIDE BENDING RADIUS4.000 INCHES
AGAVEND ITEM IDENTIFICATION2350-01-087-1095
AHNCCONNECTION STYLESWIVEL NUT, FLARELESS 1ST END
AHNCCONNECTION STYLESWIVEL NUT, FLARELESS 2ND END
AKUUEND CONNECTION DESIGNELBOW 2ND END
AKUUEND CONNECTION DESIGNSTRAIGHT 1ST END
AWLSCONNECTION TYPETHREADED INTERNAL TUBE 1ST END
AWLSCONNECTION TYPETHREADED INTERNAL TUBE 2ND END
CMLPTHREAD QUANTITY PER INCH12 1ST END
CMLPTHREAD QUANTITY PER INCH12 2ND END
CQBDBURST TEST PRESSURE9000.0 POUNDS PER SQUARE INCH
CQCSLAYER COMPOSITION AND LOCATIONOUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
CQGMMAXIMUM OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH
CQJXNOMINAL THREAD SIZE1.0625 INCHES 1ST END
CQJXNOMINAL THREAD SIZE1.0625 INCHES 2ND END
CQRBSEAT ANGLE12.0 DEGREES 1ST END
CQRBSEAT ANGLE12.0 DEGREES 2ND END
CRDWHYDROSTATIC TEST PRESSURE6000.0 POUNDS PER SQUARE INCH
CRFYFLOW ANGLE90.0 DEGREES 2ND END
CRWLINSIDE SURFACE CONDITIONSMOOTH
CRXXMEASURING METHOD AND LENGTH21.500 INCHES NOMINAL WORKING
FEATSPECIAL FEATURESSLEEVE LENGTH 3 INCH NOMINAL
MEDAMEDIA FOR WHICH DESIGNEDAIR SINGLE RESPONSE AND GAS SINGLE RESPONSE AND HYDRAULIC FLUID SINGLE RESPONSE
THSDTHREAD SERIES DESIGNATORUNJ 1ST END
THSDTHREAD SERIES DESIGNATORUNJ 2ND END
ZZZKSPECIFICATION/STANDARD DATA81343-AS117 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
AAGRCROSS-SECTIONAL SHAPE STYLEROUND
AAJDTHREAD CLASS3B 1ST END
AAJDTHREAD CLASS3B 2ND END
AAJFTHREAD DIRECTIONRIGHT-HAND 1ST END
AAJFTHREAD DIRECTIONRIGHT-HAND 2ND END
AARXINSIDE DIAMETER0.602 INCHES NOMINAL
ABJHTEMP RATING-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE
ABKVOUTSIDE DIAMETER1.360 INCHES NOMINAL
ACKHMINIMUM INSIDE BENDING RADIUS4.000 INCHES
AGAVEND ITEM IDENTIFICATION2350-01-087-1095
AHNCCONNECTION STYLESWIVEL NUT, FLARELESS 1ST END
AHNCCONNECTION STYLESWIVEL NUT, FLARELESS 2ND END
AKUUEND CONNECTION DESIGNELBOW 2ND END
AKUUEND CONNECTION DESIGNSTRAIGHT 1ST END
AWLSCONNECTION TYPETHREADED INTERNAL TUBE 1ST END
AWLSCONNECTION TYPETHREADED INTERNAL TUBE 2ND END
CMLPTHREAD QUANTITY PER INCH12 1ST END
CMLPTHREAD QUANTITY PER INCH12 2ND END
CQBDBURST TEST PRESSURE9000.0 POUNDS PER SQUARE INCH
CQCSLAYER COMPOSITION AND LOCATIONOUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
CQGMMAXIMUM OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH
CQJXNOMINAL THREAD SIZE1.0625 INCHES 1ST END
CQJXNOMINAL THREAD SIZE1.0625 INCHES 2ND END
CQRBSEAT ANGLE12.0 DEGREES 1ST END
CQRBSEAT ANGLE12.0 DEGREES 2ND END
CRDWHYDROSTATIC TEST PRESSURE6000.0 POUNDS PER SQUARE INCH
CRFYFLOW ANGLE90.0 DEGREES 2ND END
CRWLINSIDE SURFACE CONDITIONSMOOTH
CRXXMEASURING METHOD AND LENGTH21.500 INCHES NOMINAL WORKING
FEATSPECIAL FEATURESSLEEVE LENGTH 3 INCH NOMINAL
MEDAMEDIA FOR WHICH DESIGNEDAIR SINGLE RESPONSE AND GAS SINGLE RESPONSE AND HYDRAULIC FLUID SINGLE RESPONSE
THSDTHREAD SERIES DESIGNATORUNJ 1ST END
THSDTHREAD SERIES DESIGNATORUNJ 2ND END
ZZZKSPECIFICATION/STANDARD DATA81343-AS117 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

Related NSN Components of AS117

Thank You for Visiting.

If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.