Request a Quote on Sensor Systems Inc Part Number 4740 with the NSN 5905-00-243-8119 Today!

Part Number: 4740
Manufacturer: Sensor Systems Inc
NIIN: 002438119
CAGE Code: 04454
FSG: 59 Electrical and Electronic Equipment Components
Country: USA
NCB Code: 00

Thank you for taking an interest in the Resistor Variable Wire Wound Non NSN parts that we carry here on Buy Military Ground Vehicle Parts. You have reached the RFQ page for part number 4740, an item that traces back to the manufacturer Sensor Systems Inc. Listed with NSN 5905002438119, this listing is available for purchase from our website at any time. If you are interested in part number 4740 and wish to learn more, be sure to fill out and submit the RFQ form found on this page. By presenting us information such as your target price and expected delivery date, we can best formulate and present a solution that closely caters to your unique needs and restrictions alike.

Product Details

“*” Required Fields Are Compulsory

Contact Information

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Customer Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Note : We Will Not Share Your Information To Any Third Parties.

Upload RFQ SHEET

To make the part searching process as simple as possible, we choose to list offerings with as much relevant information as we can. For example, while part number 4740 is manufactured by Sensor Systems Inc, it is specifically listed along with CAGE Code 04454. With this identifier, you can trace this item back to the exact facility it was sourced from. Additionally, with the NSN 5905-00-243-8119, this signifies that the product belongs to the Federal Supply Class 5905 Resistors. Alongside our easy-to-navigate database, we also offer highly competitive pricing and rapid lead times for the benefit of our customers. Get in touch with an industry expert today and see why so many customers steadily depend on us for their operational needs. 

NSN Information for Part Number 4740 with NSN 5905-00-243-8119, 5905002438119

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-243-8119

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050024381190NB
CIICHCCESDPMICCriticalityENAC
UBU
Part NumberISCRNVCRNCCHCCMSDSSADC
4740223

Characteristics Data of NSN 5905-00-243-8119, 5905002438119

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY4
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER0.9688 INCHES MAXIMUM
AAVMPILOT LENGTH0.0620 INCHES NOMINAL
ABHPOVERALL LENGTH2.951 INCHES MAXIMUM
ABPAUNDERCUT DIAMETER1.625 INCHES MAXIMUM
ABPCUNDERCUT WIDTH0.0730 INCHES MINIMUM
ABPMBODY DIAMETER1.761 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.1247 INCHES MAXIMUM
ABXFSHAFT LENGTH0.625 INCHES NOMINAL
ADAQBODY LENGTH1.901 INCHES MAXIMUM
ADAVOVERALL DIAMETER2.218 INCHES MAXIMUM
AECZMOUNTING LIP DIAMETER1.7500 INCHES NOMINAL
AEDAMOUNTING LIP DEPTH0.0930 INCHES NOMINAL
AEDXSHAFT STYLEROUND,SLOTTED
AEDZSHAFT BEARING TYPEBALL
AEFDACTUATOR TYPEDOUBLE ENDED SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION165.0 MAXIMUM
AEFKMAXIMUM STARTING TORQUE2.10 INCH-OUNCES
AEFYSHAFT END PLAY0.00500 INCHES
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CBMECUBIC MEASURE7.345 CUBIC INCHES
CQCCELECTRICAL RESISTANCE PER SECTION1.0 MEGOHMS 3RD SECTION
CQCCELECTRICAL RESISTANCE PER SECTION100.0 KILOHMS 1ST SECTION
CQCCELECTRICAL RESISTANCE PER SECTION100.0 PERCENT,RATED AMPERES C AND BETTER INDUSTRIAL CLEARS
CQCCELECTRICAL RESISTANCE PER SECTION5.0 PERCENT,RATED AMPERES C AND BETTER V.G. STEPPING
CQCHTAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION67.23 1ST SECTION
CQCHTAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION67.23 2ND SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.30/0.30 ALL SECTIONS
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 ALL SECTIONS
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 ALL SECTIONS
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR ALL SECTIONS
CRGMFUNCTION CONFORMITY PER SECTIONALL SECTIONS ABSOLUTE CONFORMITY
CRJSFIXED TAP QUANTITY PER SECTION1 1ST SECTION
CRJSFIXED TAP QUANTITY PER SECTION1 2ND SECTION
CRKSTAP LOCATION TOLERANCE PER SECTION-10.0 TO 10.0 DEG ANGULAR ROTATION 2ND SECTION
CRKSTAP LOCATION TOLERANCE PER SECTION-10.0/10.0 DEG ANGULAR ROTATION 1ST SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0/10.0 ALL SECTIONS
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSBXFUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS TABLE
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 ALL SECTIONS
FEATSPECIAL FEATURESREAR SHAFT LENGTH IS 0.375 INCHES MINIMUM,DIAMETER IS 0.1247 INCHES MAXIMUM
TESTTEST DATA DOCUMENT55972-1960923 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW
TTQYTERMINAL TYPE AND QUANTITY14 TURRET

Related NSN Components of 4740

Thank You for Visiting.

If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.