Request a Quote on Teledyne Controls Llc Part Number 808953 with the NSN 5905-00-980-0830 Today!

Part Number: 808953

Manufacturer: Teledyne Controls Llc

NSN: 5905-00-980-0830

NIIN: 009800830

Item Name : Resistor Variable Wire Wound Pre

CAGE Code: 98571

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

Thank you for taking an interest in the Resistor Variable Wire Wound Pre NSN parts that we carry here on Buy Military Ground Vehicle Parts. You have reached the RFQ page for part number 808953, an item that traces back to the manufacturer Teledyne Controls Llc. Listed with NSN 5905009800830, this listing is available for purchase from our website at any time. If you are interested in part number 808953 and wish to learn more, be sure to fill out and submit the RFQ form found on this page. By presenting us information such as your target price and expected delivery date, we can best formulate and present a solution that closely caters to your unique needs and restrictions alike.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Customer Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Note : We Will Not Share Your Information To Any Third Parties.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To make the part searching process as simple as possible, we choose to list offerings with as much relevant information as we can. For example, while part number 808953 is manufactured by Teledyne Controls Llc, it is specifically listed along with CAGE Code 98571. With this identifier, you can trace this item back to the exact facility it was sourced from. Additionally, with the NSN 5905-00-980-0830, this signifies that the product belongs to the Federal Supply Class 5905 Resistors. Alongside our easy-to-navigate database, we also offer highly competitive pricing and rapid lead times for the benefit of our customers. Get in touch with an industry expert today and see why so many customers steadily depend on us for their operational needs.

NSN Information for Part Number 808953 with NSN 5905-00-980-0830, 5905009800830

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-00-980-0830 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE	5905	009800830		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				C
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
808953	C	9	5

Characteristics Data of NSN 5905-00-980-0830, 5905009800830

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	3
AAQL	BODY STYLE	CYLINDRICAL SERVO MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
AAVL	PILOT DIAMETER	0.7494 INCHES MINIMUM AND 0.7497 INCHES MAXIMUM
AAVM	PILOT LENGTH	0.0600 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM
ABPA	UNDERCUT DIAMETER	0.7494 INCHES MINIMUM AND 0.7497 INCHES MAXIMUM
ABPC	UNDERCUT WIDTH	0.0850 INCHES NOMINAL
ABPM	BODY DIAMETER	0.885 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.1246 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM
ABXF	SHAFT LENGTH	0.470 INCHES NOMINAL
ADAQ	BODY LENGTH	1.550 INCHES NOMINAL
AECZ	MOUNTING LIP DIAMETER	0.8850 INCHES MAXIMUM
AEDA	MOUNTING LIP DEPTH	0.0600 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM
AEDX	SHAFT STYLE	ROUND,SLOTTED
AEDZ	SHAFT BEARING TYPE	BEARING
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	340.0 NOMINAL
AEFK	MAXIMUM STARTING TORQUE	0.30 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	0.30 INCH-OUNCES
AEFY	SHAFT END PLAY	0.005 INCHES
AEGC	SHAFT RADIAL PLAY	0.001 INCHES
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
AXGY	MOUNTING METHOD	CLAMP RING
CBBL	FEATURES PROVIDED	HUMIDITY PROOF
CQCC	ELECTRICAL RESISTANCE PER SECTION	15.3 KILOHMS 1ST SECTION AND 10.0 KILOHMS 2ND SECTION AND 10.0 KILOHMS 3RD SECTION
CQCH	TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION	238.0 1ST SECTION AND 283.0 1ST SECTION AND 283.0 2ND SECTION AND 283.0 3RD SECTION
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	360.0 NOMINAL
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.40 TO 0.40 1ST SECTION AND-0.50 TO 0.50 2ND SECTION AND-0.50 TO 0.50 3RD SECTION
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	85.0 ALL SECTIONS
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-20.0 TO 20.0 1ST SECTION AND-90.0 TO 90.0 2ND SECTION AND-90.0 TO 90.0 3RD SECTION
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR ALL SECTIONS
CRGM	FUNCTION CONFORMITY PER SECTION	ALL SECTIONS STEPPED CONFORMITY
CRJS	FIXED TAP QUANTITY PER SECTION	2 1ST SECTION AND 1 2ND SECTION AND 1 3RD SECTION
CRKS	TAP LOCATION TOLERANCE PER SECTION	-1.0 TO 1.0 DEG ANGULAR ROTATION ALL SECTIONS
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-4.0 TO 4.0 ALL SECTIONS
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CONTINUOUS MOTION
CSBX	FUNCTION CHARACTERISTIC PER SECTION	ALL SECTIONS TABLE
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	25.0 ALL SECTIONS
PMLC	PRECIOUS MATERIAL AND LOCATION	TERMINALS GOLD AND TERMINALS SILVER
PRMT	PRECIOUS MATERIAL	GOLD AND SILVER
TEST	TEST DATA DOCUMENT	98571-808953 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI
TTQY	TERMINAL TYPE AND QUANTITY	13 TURRET